- Contact Person : Ms. Cai Serra
- Company Name : Jieyang Sipu Cable Co., Ltd.
- Tel : 86-20-38636408,13570246760
- Fax : 86-20-38636471
- Address : Guangdong,Guangzhou,Room 509,Mangguo apartment,No.18 Xinioujiao Village,Shatai North Road,Baiyu District
- Country/Region : China
- Zip : 510000
Related Product Searches:SIPU good quality 4pin SATA 1/2 cable,High Quality,SATA 1/2 cable, 4pin cable,SATA 1/2
1.transfer rates up to 1.5G 2.Low crosstalk, 3.length:18'' 4.CE&RoHS&UL
The serial ATA, or SATA computer bus, is a storage-interface for connecting host bus adapters to mass storage devices such as hard disk drives and optical drives. The SATA host adapter is integrated into almost all modern consumer laptop computers and desktop motherboards.
"SATA II" and "SATA 2" are the most common marketing terms for any "second-generation" SATA drives, controllers or related accessories.
2. Desciption:
1) SATA DATA
The SATA standard defines a data cable with seven conductors (3 grounds and 4 active data lines in two pairs) and 8 mm wide wafer connectors on each end. SATA cables can have lengths up to 1 metre (3.3 ft), and connect one motherboard socket to one hard drive. PATA ribbon cables, in comparison, connect one motherboard socket to up to two hard drives, carry either 40 or 80 wires, and are limited to 45 centimetres (18 in) in length by the PATA specification
2) SATA POWER
The SATA standard specifies a different power connector than the decades-old four-pin Molex connector found on pre-SATA devices. Like the data cable, it is wafer-based, but its wider 15-pin shape prevents accidental mis-identification and forced insertion of the wrong connector type. Native SATA devices favor the SATA power-connector, although some early SATA drives retained older 4-pin Molex in addition to the SATA power connector.
SIPU good quality 4pin SATA 1/2 cable